Turnigy ACCUCELL-6, User Manual

Page: 7 / 24

4. Warning and security tips
-
5
-
Never leave the charger unsupervised when charging, if any mal-function is observed
please terminate the process immediately and refer to the manual.
•Never put the charger into the place which dust/damp/vibrate.
•The input power is only for DC 10-18V.
•Please put it onto the surface which it is firm/Anti flammable. Never put it onto the carpet
or others similar objects. Make sure it is far away from the Anti flammable area.
•Never cover the fan, keep the cooling fan well ventilated .
•Make sure the correct setting data, if the program was setting wrong, it will damage the
battery. Especially for the Li-xx battery, it will explode due to the over charge/discharge.
•It should be connect the cable to the charger first then connect the battery. When
disconnecting, the opposite operation
•User must check the voltage and capacity of the Li-xx battery pack before using. The
battery can be Series connection or Parallel connection. When it is paralleled, the capacity
of the battery pack is the total capacity of each single battery and the voltage of battery
pack will not change. It is suggested to choose the Series connection for the li-xx battery
because it possible to lead the explosion if the voltage is un-balance when charging.