13. Warning and error messages
It incorporates a variety of functions for the systems to verify processes and the state of
the electronics. In case of an error the screen will display the cause of error and emit an
audible sound.
Incorrect polarity connected.
Pb battery is interrupted.
Short-circuit of the output termination.
Input voltage higher than 18V.
The processor cannot control the feeding current, please repair it.
Wrong connection of the connector detected; please check the
connector and cable.
Voltage of one cell in the battery pack is too high; please check the
voltage of each cell.
Voltage of one cell in the battery pack is too low; please check the
voltage of each cell.
The internal temperature of the unit goes too high. Cool down the unit.
CONNECT ERROR
CHECK MAIN PORT
Lithium
/
NiCd
/
NiMH
Batteries is interrupted.
CELL NUMBER
INCORRECT
CONTROL FAIL
CELL ERROR
HIGH VOLTAGE
CELL ERROR
LOW VOLTAGE
INT.TEMP.TOO HI
CELL ERROR
VOLTAGE INVALID
DC IN TOO LOW
Input voltage less than 12V.
DC IN TOO HI
The balance port invalid when charging in balance mode.
BATTERY WAS FULL
The battery’s voltage higher than the setting when charging in balance
mode.
-23-
