Intesis
Home
®
IS-IR-WIFI-1
User Manual r1.3 eng
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
IntesisHome
®
is a registered trademark
of Intesis Software SL
URL
Contact
http://www.intesishome.com
http://www.intesishome.com/contact
22 / 25
12 Anti-frost function
In order to prevent the indoor temperature reach freezing points, IntesisHome offers the
possibility to set the set point temperature on a special set point. It can be enabled/disabled
both: from the App (iOS and Android) and from the web interface.
Turns the anti-frost function On/Off
This function can be configured
only
from the web interface, clicking on the gearwheel icon,
allowing:
· protection temperature:
Minimum temperature desired.
Below that, the IntesisHome system will turn the AC unit on
with the defined set point temperature. Protection
temperature values may vary from 16ºC to 10ºC (16ºC
Default).
· hysteresis temperature:
When the ambient temperature
is higher than
protection temperature + hysteresis
temperature
, the IntesisHome system will turn the AC unit
Off. Hysteresis values may vary from 1ºC to 5ºC.
· setpoint temperature:
Temperature to be set on the AC
unit when ambient temperature is below the
protection
temperature
and the AC unit is turned on. Set Point
temperature values may vary from 18 to 30ºC.
· status:
Indicates if the AC unit is On/Off by anti-frost
function.
Check the figure next to see how the anti-frost system works:
NOTE:
Fan switches to high speed automatically when the anti-frost function turns the AC
unit On.
!
