Intesis
Home
®
IS-IR-WIFI-1
User Manual r1.3 eng
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
IntesisHome
®
is a registered trademark
of Intesis Software SL
URL
Contact
http://www.intesishome.com
http://www.intesishome.com/contact
21 / 25
It is also important to remember that some functions (modes, fan speed
…) are directly related
with the specific features of each AC unit. Therefore, it is important to keep in mind that the
closest this selection is similar to reality the best the user experience would be.
10 Advanced configuration
On the settings / device section of the web interface (at user.intesishome.com), advanced
configuration can be carried out. Advanced parameters that can be configured are:
· External LED:
Determines if the IntesisHome device LED will be:
On:
On during Wi-Fi configuration, IR configuration and working mode (always On).
Off:
Off during Wi-Fi configuration, IR configuration and working mode (always Off).
Blinking only on change:
Blinking when commands are sent to the AC unit during
working mode.
· External LED intensity:
Determines the LED intensity. Values vary from 0 to 5.
· Temperature offset:
Determines a temperature offset to be applied to the ambient
temperature measured by the IntesisHome internal probe. Values vary from -3ºC to +3ºC.
11 Calendar, Timers and Scenes
The IntesisHome application offers you the opportunity to schedule some actions to be applied
to the AC unit. This can be done basically using 3 different features of the IntesisHome
application: Calendar, Timers and Scenes.
Please, check the IntesisHome user manual for more information about calendar and scenes at
www.intesishome.com/docs/User-Manual-IntesisHome.pdf
