Digital C-FLUOR Submersible Probe
998-2131
Rev. 1.0
Page 9
3.
Digital C-FLUOR Software & Functions
Software is used to configure Digital C-FLUOR Probes for digital integration and/or
deployment. Digital C-FLUOR Probes do not store data internally, ASCII data
strings are sent out via serial communication.
3.1 Setup
The Setup tab displays the p
robe’s serial number and the probe-specific
application; these values cannot be edited. There are two modes that can be
selected, Polling and Data Streaming.
3.1.1 Polling Mode
Polling Mode is used when data storage or power is limited. Power is
supplied to the probe and a command is used to trigger the probe to
make a measurement. See Appendix E for command list. Every poll
command will return an individual ASCII data string that contains a
concentration value relative to the fluorescence detected. To activate
polling mode, simply put a checkmark into the
box next to the “Polling”
function and select QUIT to exit the software. Once power is supplied to
the probe, it will be ready to receive a poll command after 0.5 seconds.
