Lit. No. 76754, Rev. 00
10
November 1, 2017
ASSEMBLY INSTRUCTIONS
1. Tires are not fully in
fl
ated when shipped. In
fl
ate
tires with a manual pump.
ASSEMBLY
2. Insert rod end into gate slide. Lock in place with
hairpin clip and washer as shown in Figure 1.
3. Assemble the upper handle assembly to main
frame (see Figure 3). Simultaneously insert rod
into upper handle as shown in Figure 2.
4. Attach clear protective cover to hopper.
WARNING
Use safety glasses and gloves when in
fl
ating
and installing the tires. Use manual pump
only to in
fl
ate. Refer to the tire sidewall for
manufacturer's recommended pressure. Do
not exceed the maximum in
fl
ation pressure.
