™
6
SAFETY FIRST!!
WARNING
TO AVOID SERIOUS INJURY,
Remove Wire From Spark Plug Before
Performing Any Assembly Procedure
Do Not Use The Engine To Perform Or
Aid In Any Assembly Procedures.
Always Follow All Safety Hazard Warnings.
Read And Follow All Safety Decals.
Wear The Appropriate Safety Gear.
To Avoid Serious Injury, Support the Tine Reel
Assemblies On a Secure Wooden Surface To
Ensure that the Tine Reel Assemblies Will Not Fall
Or Drop On Hands and Feet.
Use Caution When Working Around the Tine Reel
Assembly, Tines Have Sharp Edges That Can
Easily Cut Hands.
STEP 1.
(See Figure 1)
Loosen the handlebar locking
nuts and rotate the handlebar from the “storage
position” to the “operating position”. Retighten the
nuts to secure the handlebar.
STEP 2.
(See Figure 1)
Check the position and routing
of the clutch control cable, the steering brake cables,
and the throttle cable. The cables must not be trapped
or caught on any chassis or handlebar component.
DO NOT START THE ENGINE!
Assembly
FIGURE 1
HANDLEBAR
LOCKING
NUTS
STORAGE
POSITION
OPERATING
POSITION
ROTATE HANDLEBAR
INTO OPERATING
POSITION
AS85370-01
LOW POSITION
MIDDLE POSITION
HIGH POSITION
(1.07 METER)
(0.91 METER)
(0.99 METER)
FIGURE 2
LOW POSITION
MIDDLE POSITION
HIGH POSITION
HIGH
LOW
MIDDLE
AS85370-02
42” INCHES
36” INCHES
39” INCHES
ASSEMBLY
SAFE-14
