background image

2

85372

All specifications, information, illustrations or photos in this manual are 

based on the latest information at the time of printing. The right is reserved to make changes without notice. 

 

Table of Contents

Product Records .....................................................................................................................2 

How To Obtain Parts and Service  ..........................................................................................2 

Specifications  .........................................................................................................................3 

Registered Trademarks ...........................................................................................................3 

Recognizing Safety Warnings and General Safety Practices  ................................................4 

Assembly .................................................................................................................................6 

Description - 

 

Intended Function and Use  ..............................................................................................8 

 

Description of Engine and Operator Controls  ..................................................................8 

 

Location of Operator Controls and Components   .............................................................8 

 

Description of Handlebar In Storage Position  ..................................................................9 

Operation - 

 

Pre-Operation Checklist ..................................................................................................10 

 

Moving the TurnAer 6 To the Worksite ............................................................................10 

 

Work Site Preparation .....................................................................................................10 

 

Planning Your Aerating Path ...........................................................................................11 

 

Maximum Angles of Operation ........................................................................................11 

 

TurnAer 6 Operating Instructions  ...................................................................................11 

Operator Daily Inspection ......................................................................................................15 

Storage ..................................................................................................................................15 

Troubleshooting Table ...........................................................................................................15 

Service - 

 

Lubrication .......................................................................................................................16 

 

Adjustments ....................................................................................................................16 

Parts Lists ..............................................................................................................................20 

Decals ...................................................................................................................................33

Product Records

IMPORTANT:  Record the information from the serial number plate of your TurnAer 6. It will be necessary to 

furnish your Model Designation, Product Number, and Serial Number when ordering parts. 

 
Model  Designation  

TurnAer 6

Product Number 

 

85372

Serial Number __________________________ 

 Engine Serial Number _________________________

Date Purchased ________________________ 

 Purchased From _____________________________

How To Obtain Parts and Service

Contact TURFCO DIRECT to order parts or to arrange 

repair service.  For a list of authorized TURFCO dealers in 

your area, or for additional information regarding TurnAer 

6, direct inquiries to TURFCO DIRECT.

TURFCO DIRECT 

1655 101

st

 Avenue North East 

Minneapolis, MN. 55449-4420  USA
Telephone (763) 785-1000 

FAX (763) 785-0556 

E-Mail -  [email protected] 

Internet -   www.turfcodirect.com

To  ensure  safety  and  proper  operation,  always 

purchase  genuine  TURFCO  replacement  parts 

from  an  authorized  TURFCO  dealer.  Replacement 

parts from other sources may damage the TurnAer 

6  and/or  create  a  safety  hazard.  Always  refer 

repairs  to  properly  trained  service  personnel.  

 

DO  NOT  ALTER  the  TurnAer  6  in  any  manner. 

Unauthorized  alterations  may  affect  its  operation, 

performance, and may result in injury or death to the 

operator as well as other individuals in the work area. 

PRODUCT RECORDS

Summary of Contents for 85372




















Reviews: