8
85372
™
INTENDED USE AND FUNCTION
The TurnAer 6 is a self-propelled, steerable, coring
tine aerator. The TurnAer 6 is intended to be used for
the aeration of the turf or soil at a properly prepared
worksite. The TurnAer 6 is NOT intended to be used
for any purpose other than the aeration of turf. The
TurnAer 6 is only intended to accept riders when
properly equipped with an optional TurnAer Chariot
(Product #86168).
DESCRIPTION OF ENGINE AND OPERATOR
CONTROLS
(See Figure 4)
The operator controls are located on the handlebar.
They consist of the engine throttle, the clutch handle,
the right and left hand steering and transport controls,
and the rear transport wheels latch handle. Ensure that
all operator controls are in good operating condition. Do
not alter operator controls and/or operate the TurnAer
6 with defective or non-operational operator controls.
Operators Position:
The correct position for the
operator is behind the handlebars. Neither the clutch
control handle or the rear transport wheel latch handle
should be engaged unless the operator is behind the
handlebars.
Description
DESCRIPTION
FIGURE 4
HANDLEBAR
CLUTCH
HANDLE
ENGINE
CONTROLS
REAR
TRANSPORT
WHEELS
TINES AND TINE REELS
THROTTLE
REAR TRANSPORT
WHEELS LATCH
HANDLE
RIGHT AND LEFT HAND
STEERING CONTROLS
AND TRANSPORT
CONTROLS
LOCATION
OF OPERATOR
CONTROLS AND
COMPONENTS
OPERATORS
POSITION
CLUTCH
HANDLE
HANDLEBAR
LOCKING NUTS
DS85372-01
