turck TX700FB, Instructions For Use Manual

Page: 28 / 36

Setting
Configuring the system settings
28
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Edit the system settings in system mode
Status device Description
Standard If no TX VisuPro runtime is running on the device:
User mode
„ Open the System Settings .
System Mode
„ Device without TX VisuPro runtime: Restart the device via
Restart
Ò
Config. OS .
„ Device with TX VisuPro runtime: Open the context menu and
select
System Settings .
„ To open the context menu: Press and hold the unused area of the
touch screen for at least 2 s.
„ Restart the device via Restart
Ò
Config. OS .
Recovery operation If the device is not responsive, use the so-called “tap-tap” procedure.
„ Touch the surface of the touch screen several times with a typing
frequency of at least 2 Hz immediately after switching on the
device.
a When the sequence is detected, the message "Tap Tap detected,
Going to Config Mode" will appear on the display.
The basic settings for the device are made in the system settings.
Setting Description
Language Configuration of the language used for the System Settings menu.
System Information about platform, status and timers (“like System on time,
“backlight on time”)
Logs Activating and exporting persistent log for BSP
Date & Time Date and time, including time zone and NTP Server
Network Configuration of the IP address of the Ethernet interface and the other
network settings like DNS, gateway, DHCP, host name, routing and
bridging.
Services Activate/deactivate services (e.g. OpenSSH server, bridge, cloud, router,
SNMP, logging)
Management Update of BSP components (Main OS, Config OS, Boot loader, XLoader),
check for partitions consistence, update of splash screen, information
about usage and size of partitions.
The update of Main OS is available only in System Mode, the update of
Config OS is only in User Mode.
Display Configuring the automatic backlight, adjusting the brightness, chan-
ging the display orientation
Restart Restarts the device
By default, the device is restarted in user mode via the "Main OS" option.
The "Configuration OS" option restarts the device directly in
System
Settings in system Mode.
Authentication Configuration ot the password for the administrator ("admin") and for
the standard user ("user”). The administrator has full access to the sys-
tem settings (updates of the BSP and other system components). The
standard user has some restrictions.