V01.00 | 2020/11
25
Click on the desired device.
Click Change or press [F2].
Change the IP address and the net mask, if necessary.
Accept the changes with Set in device .
Fig. 18: Turck Service Tool – changing the IP configuration
7.6
Programming with CODESYS
The devices are delivered with a pre-installed CODESYS runtime.
The CODESYS software as well as the CODESYS package for the devices can be downloaded
from
.
Prerequisites
n
CODESYS (≥ V 3.5.14.0) and the package“TXxxx HMI/PLC series” for the device have to be in-
stalled on a PC running Microsoft Windows.
7.7
Programming with TX VisuPro
Prerequisites
n
For programming the HMI/PLCs with TX VisuPro, the software tool has to be installed on a PC
computer running Microsoft Windows.
n
If the WebVisu of TX VisuPro is to be used instead of the CODESYS-WebVisu, the TX VisuPro-
Runtime must be installed first.
n
Before installing TX VisuPro, the existing CODESYS runtime has to be deleted.
To delete the currently installed runtime, run the following command:
System Settings
Ò
Management
Ò
Data
Ò
Clear
