turck TBIP-L-FDIO1-2IOL Series, Safety Manual

Page: 18 / 21

18
Appendix: Technical data
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
13 Appendix: Technical data
Devices
Type TBIP-L5-FDIO1-2IOL
– Ident no. 6814053
– YoC 2017
Type TBIP-L4-FDIO1-2IOL
– Ident no. 100000360
– YoC 2017
Interfaces
Ethernet 2 x M12, 4-pin, D coded
Service interface Ethernet
Power supply
Connection options
– TBIP-L5-FDIO1-2IOL 7/8’’, 5-pole
– TBIP-L4-FDIO1-2IOL 7/8’’, 4-pole
V1 (incl. electronics supply) 24 VDC
V2 24 VDC, only through connected
Permissible range 20,4…28,8 VDC
Isolation voltages ≥ 500 VAC
Times
Internal delay time
for calculating the Watchdog time) 10 ms
Reaction times see “6.3 Safety Characteristic Data” on p. 9
Safety inputs for potential free contacts
Loop resistance <150 Ω
Max. cable length max. 1 μF at 150 Ω, limited by line capacity
Test pulse typ. 0.6 ms
Test pulse max. 0.8 ms
Interval between 2 test pulses 900 ms (for static inputs)
Safety inputs for OSSD
Signal voltage, low level EN 61131-2, type 1 (< 5 V; < 0,5 mA)
Signal voltage, high level EN 61131-2, type 1 (> 15 V; < 2 mA)
Max. OSSD supply per channel 2 A
Max. tolerated test pulse width 1 ms
Min. interval between 2 test pulses 12 ms at 1 ms test pulse width
8.5 ms at 0.5 ms test pulse width
7.5 ms at 0.2 ms test pulse width
Safety outputs
Suitable for inputs according to EN 61131-2, type 1
Output level in OFF-state
< 5 V
Output current in OFF-state < 1 mA
Test pulse resistive load, max. 0.5 ms
Test pulse max. 1.25 ms
Interval between 2 test pulses, typical 500 ms