10
Operating Instructions
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | [email protected] | www.turck.com
7.2
Before Operation
The operator of the machine or the plant in which the safety related system is used, is responsi-
ble for the correct and safe overall function of every single safety component.
➤
➤
Carry out a validation of the safety category for the complete system depending on the selec-
tion of the used safety components.
7.2.1
Mounting
ATTENTION
Mounting on uneven surfaces
Damage to the device due to mechanical tensions
➤
➤
Mount the device onto an even mounting surface
➤
➤
Use two M6 screws to mount the device.
➤
➤
Mount the device onto a pre-drilled and grounded mounting surface. The maximum
tightening torque for the screws is 1.5 Nm.
218 [5.58]
M6 (2x)
max. 1.5 Nm
