19
V01.0| 2017/04
TBPN-L1
-FDIO1-2IOL -
Standard IO-Link
2.7
Adapting the Process Data Mapping
The mapping of process data can be adapted application-specifically via the IO-Link-master's
parameterization.
Depending on the used fieldbus, it can be necessary to swap process data word-wise, double word-
wise or completely in order to align them to the data structure in the PLC.
The process data mapping is determined channel by channel through the parameters "process
input data mapping" and "process output data mapping" (see
).
Example mapping for field buses with Little Endian-format:
Mapping from master
field bus
PLC
Devices at port
1 and 2
Parametrization
of the channel
Process output data mapping
IO-Link device
Byte (
A)
Byte (
A)
Byte 0
Status
Byte 1
Control
PORT1
Byte 2
temperature
Low byte
2 byte
Process data
(swap 16 bit)
temperature
High byte
Byte 3
High byte
Low byte
PORT2
Byte 4
Diagnosis
4 byte
Process data
(swap all)
Counter/
position value
MSByte
Byte 5
Counter/
position value
Low byte
High byte
Byte 6
High byte
Low byte
Byte 7
MSByte
Diagnosis
A
Low byte, the lowest byte Low-Byte
High byte High-Byte
MSByte: Most Significant Byte
Summary of Contents for TBIP-L...-FDIO1-2IOL Series TBIP-L4-FDIO1-2IOL
Page 1: ...Your Global Automation Partner TBIP L FDIO1 2IOL Safety Block I O Module Instructions for Use...
Page 2: ...2 Hans Turck GmbH Co KG T 49 208 4952 0 F 49 208 4952 264 more turck com www turck com...
Page 118: ...Hans Turck GmbH Co KG T 49 208 4952 0 F 49 208 4952 264 more turck com www turck com 2...
