V 01.01 | 2018/11
7
3
For Your Safety
The product is designed according to state-of-the-art technology. However, residual risks still
exist. Observe the following warnings and safety notices to prevent damage to persons and
property. Turck accepts no liability for damage caused by failure to observe these warning and
safety notices.
3.1
Intended Use
These devices are designed solely for use in industrial areas.
The block modules of the TBIL-S… series are IO-Link devices and serve as I/O hub between field
devices (sensors/actuators) and the IO-Link master. The hubs provide 8 digital I/O channels.
Depending on the device type, the devices provide 8 digital inputs for connecting digital
sensors or 8 digital DXP channels for connecting digital sensors and actuators. In the devices
with DXP channels, each I/O channel can be used as digital in- or output without additional
configuration. The device is designed in IP67/IP69K and can be mounted directly in the field.
The devices may only be used as described in these instructions. Any other use is not in accord-
ance with the intended use. Turck accepts no liability for any resulting damage.
3.2
General Safety Instructions
n
The device may only be assembled, installed, operated, parameterized and maintained by
professionally-trained personnel.
n
The device may only be used in accordance with applicable national and international regu-
lations, standards and laws.
n
The device only meets the EMC requirements for industrial areas and is not suitable for use
in residential areas.
