V01.01 | 2022/03
7
3
For your safety
The product is designed according to state-of-the-art technology. However, residual risks still
exist. Observe the following warnings and safety notices to prevent damage to persons and
property. Turck accepts no liability for damage caused by failure to observe these warning and
safety notices.
3.1
Intended use
The condition monitoring sensors of the CMVT-QR20-IOL… series monitor the temperature and
vibration of machines.
The process values are output by the device via IO-Link.
The devices also indicate via switching outputs any vibration speeds above the permissible
limits. The devices are designed for condition monitoring or for predictive maintenance tasks.
The devices may only be used as described in these instructions. Any other use is not in accord-
ance with the intended use. Turck accepts no liability for any resulting damage.
3.2
Obvious misuse
n
The devices are not safety components and must not be used for personal or property
protection.
3.3
General safety instructions
n
The device meets the EMC requirements for industrial areas. When used in residential areas,
take measures to avoid radio interference.
n
The device may only be assembled, installed, operated, parameterized and maintained by
professionally-trained personnel.
n
The device may only be used in accordance with applicable national and international
regulations, standards and laws.
n
Only operate the device within the limits stated in the technical specifications.
