V01.01 | 2022/03
17
9
Setting
9.1
Settable functions and features
Parameter
Meaning
Reset device
The device is restarted. Communication is interrupted momentarily. The meas-
ured maximum vibration values are reset.
Resetting the application
The application-specific parameters are reset. Communication is not interrupted.
The sensor is switched to a defined operating state. Identification parameters are
not affected. The measured maximum vibration values are reset.
Restoring the factory setting
The factory setting of the device is restored. The device is restarted after the
reset.
Configuring process data
The following process data can be set:
n
RMS in mm/s
n
Peak-to-peak in mm/s
n
RMS in g
n
Peak-to-peak in g
The values are determined within set time windows and output cyclically. The
maximum value since the power supply was switched on can also be measured.
The maximum values are reset if the power supply is interrupted.
Output 1
The switching outputs can be set either as NO contacts or as NC contacts.
Output 1 configuration
The switching outputs can be set for either PNP or NPN operation. PNP is active
by default.
Output 1 function
The output can be set as a pre-alarm or warning and as an alarm.
Output 2
The switching outputs can be set either as NO contacts or as NC contacts.
Output 2 configuration
The switching outputs can be set for either PNP or NPN operation. PNP is active
by default.
Output 2 function
The output can be set as a pre-alarm or warning and as an alarm.