turck BL20-GW-CANOPEN, User Manual, Page: 66 / 95

Guidelines for Station Planning
D301087 1211 - BL20 CANopen 6-12
6.4 Extending an Existing Station
Once alterations have been made to the order of the modules on the BL20 station, the new
configuration must be saved to the ”actual configuration memory” of the BL20 gateway. This is done
by either pressing the SET button between the two decimal rotary coding switches (see chapter 2) or
by making the appropriate settings in the configuration software (see chapter 3).
Attention
Please note that extensions to the station (mounting further modules) should be carried out
only when the station is off-circuit.