background image

V01.01 | 2021/09

5

1

About These Instructions

These instructions for use describe the structure, functions and the use of the product and will
help you to operate the product as intended. Read these instructions carefully before using the
product. This is to avoid possible damage to persons, property or the device. Retain the instruc-
tions for future use during the service life of the product. If the product is passed on, pass on
these instructions as well.

1.1

Target groups

These instructions are aimed at qualified personal  and must be carefully read by anyone
mounting, commissioning, operating, maintaining, dismantling or disposing of the device.

1.2

Explanation of symbols used

The following symbols are used in these instructions:

DANGER

DANGER indicates a dangerous situation with high risk of death or severe injury if
not avoided.

WARNING

WARNING indicates a dangerous situation with medium risk of death or severe in-
jury if not avoided.

CAUTION

CAUTION indicates a dangerous situation of medium risk which may result in minor
or moderate injury if not avoided.

NOTICE

NOTICE indicates a situation which may lead to property damage if not avoided.

NOTE

NOTE indicates tips, recommendations and useful information on specific actions
and facts. The notes simplify your work and help you to avoid additional work.

u

CALL TO ACTION

This symbol denotes actions that the user must carry out.

a

RESULTS OF ACTION

This symbol denotes relevant results of actions.

1.3

Other documents

Besides this document the following material can be found on the Internet at 

www.turck.com

:

n

Data sheet

n

IO-Link parameters manual

n

Commissioning manual IO-Link devices

1.4

Feedback about these instructions

We make every effort to ensure that these instructions are as informative and as clear as pos-
sible. If you have any suggestions for improving the design or if some information is missing in
the document, please send your suggestions to 

[email protected]

.

Summary of Contents for 6901041


























Reviews: