5
increase or reduce 10°C. At 200°C, press the "+", will loop back to a temperature of 50°C,
press the "-" at 50°C temperature will cycle back to 200°C. In the process of temperature
control, temperature digital display will flicker on the screen (not flashing during working),
after flickering 3 times, the temperature has been done of setting;
The adjusting time range is 1 to 60 mins. every click on the + / - time will increase or
reduce 1 min. At 60 min if you press "+", the time will cycle back to 01 min., At 01 min, if
you press "-", the temperature will cycle back to 60 min. In the process of time control,
time digital display will flicker on the screen (not flashing during working), after flickering 3
times, the time has been done of setting.
3. Start, pause/stop
After select function, set the right time and right temperature, press
, the
start to
flicker, after BEEPS sounds, machine start to work.
During the machine working, press
, after BEEPS sounds, machine stop working,
stop flickering. during the machine working, press
, after BEEPS, machine stop
working, and machine back to standby mode.
Noted:
(1). During working, you can take frying tray out, stop working, and you can check cooking
result or add more food, machine continue to work on the program if pull in the frying tray.
(2). Power cut or unplug during working, machine stop working, all light off, machine
continue to work on the program when power on or plug in again.
3, during work, six red lights for heating element. When red six red lights flicker
one
by
one, it means heating element is working, when the temperature reach setting
temperature, heating element stop working, and six red lights don’t flicker.
4. End of program
Heating element stop working when working time was done, show 00 min, motor
continues to work, buzzer warning. motor continues to work 1 min, cooling machine,
then machine enter the standby mode.