EN
UNI 30 E
17261 - 561.228
8 - MAINTENANCE
Cap. 8 -
Pag. 1/6
THIS MANUAL IS PROPERTY OF
-
ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
8.1
TO BE CARRIED OUT BY OPERATOR
The following are the basic instructions for performing proper maintenance on the machine. More detailed information
relative to maintenance of the diesel engine is given in the respective use and maintenance manual, which operators
are required to read and understand (along with the present manual) before using the machine.
OPERATIONS THAT MUST BE PERFORMED DAILY
At the start of work
• CHECK COMPRESSOR OIL
Check the compressor oil level:
the level of compressor oil must always correspond to the maximum level indicated on the stick.
It is unlikely that the compressor works in a perfectly horizontal position on site, as recommended by the manufacturer.
Therefore, to guarantee correct lubrication comply with that stated above scrupulously.
To top-up:
use SHELL RIMULA EXTRA D 15W40 or equivalent.
• CHECK LUBRICATION TANK WATER
Check the level of water in the lubrication tank, remembering in winter to empty it in the evening or at least add a suitable
percentage of anti-freeze to prevent the formation of ice during standstill periods.
Remove the cap to empty the lubrication tray (FIG.49-REF.1).
the water must be replaced every 5 working days.
1
max
1
FIG.48 FIG.49
• Reducer oil level:
Check the visible level control device (FIG.51-REF.1) and top-up if necessary (FIG.51-REF.2) with ELF POLYTELIS 100 or
equivalent.
