EN
UNI 30 E
17261 - 561.228
4 - TRANSPORT AND HANDLING
Cap. 4 -
Pag. 1/2
THIS MANUAL IS PROPERTY OF
-
ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
4.1 LIFTING
The machine has three attachment points for lifting using a crane.
- Check that the machine is off and there are no pipes connected.
- Check that the bodywork is closed using the relevant hooks and the safety screw that blocks the bodywork (FIG.07-REF.1) is
regularly fixed.
- Lift the suspension bar and position the hole facing upwards.
- Hitch the ropes to the handles and to the suspension bar hole.
1
FIG.07 FIG.08
When handling the machine using a crane, the Safety Standards must be complied with that rule lifting
operations and the relative equipment.
Use two type-approved ropes for lifting 2,000 kg with length of:
- 1.00 mt. ropes hitched to handles;
- 1.30 mt. rope hitched to suspension bar.
Make sure the area is clear of any bystanders before lifting the machine.
Do not stand under suspended load.
To prevent damage to the machine, do not lift or lower it with abrupt movements.
Do not change the lifting hook's anchoring point.
Do not push the machine.
Lifting should be carried out in strict compliance with all Standards in force regarding lifting, and the equipment used
must be in good working order and also comply with regulations.
The lifting apparatus must be operated by specifically trained and authorised staff.
