14
Trouble-shooting
Fault
Possible Cause
Remedy
The prover does not operate /
start.
The mains isolating switch on the
wall, circuit breaker or fuses are
“off” at the power board.
The power switch on the cabinet
is off.
Turn on.
Rotate switch. Indicator will
illuminate.
No humidity.
Unit is in HOLD mode
No water in trough.
Switch unit to PROOF mode.
(Humidity is only generated in
PROOF mode).
Fill with water.
Slow recovery.
Overloading of cabinet.
Door opened unnecessarily.
Reduce batch size.
Do not open unnecessarily.
Door does not close.
Tray in way of door.
Correctly position tray in rack.
