Cleaning
13
Cabinet
Clean with a good quality stainless steel cleaning compound. Harsh abrasive cleaners may damage
the
surface.
Side racks
To remove, take hold of the centre rung and lift upwards to disengage the rack key-holes from the
hanger studs. To replace, hold horizontally, engage keyholes onto studs and push down.
Door
Wash with warm water and detergent solution using a soft sponge in straight lines up and down the
door. Rinse with clean, warm water and dry off.
Water tank
Remove the RH side rack and remove tank by lifting off its hanger studs. Clean with warm soapy
water. Rinse thoroughly and refit.
Water tank element
When the element becomes limed/scaled remove the water trough and clean. Replace water trough
and half fill with white vinegar or acetic acid, then fill to the normal level with water. Switch the unit on,
turn the humidity to HI and operate for approximately 30 minutes. Remove trough and clean the
element with a damp cloth when cooled. Rinse out the through and refit to unit.
This procedure is recommended to be carried out once a week. Frequency of cleaning the element
may be increased or decreased depending on the lime depositing on the element.
Caution:
ALWAYS TURN OFF THE POWER SUPPLY BEFORE CLEANING.
THIS UNIT IS NOT WATER PROOF.
DO NOT
USE WATER JET SPRAY TO CLEAN INTERIOR OR EXTERIOR OF THIS UNIT.
Cleaning Guidelines
