Operation
8
Operation Guide
This oven is intended for use in a commercial kitchen and must only be put to the use for which it was designed, i.e. baking food
product. To use this oven correctly please read the following sections carefully:-
Temperature Display -
Shows pre-set chamber temperature.
When used with the ‘Temp’ key, display shows
actual oven temperature for 5 seconds.
Shows baking programs and error codes.
‘Steam’ Key and LED -
Used to set / initiate steam injection
time (Bake Steam Mode).
LED is ‘On’ when steam is injecting.
Used to set automatic moisture level (Moisture
Mode).
LED is ‘On’ when automatic moisture injection is
set.
Temperature Adjustment Control
Time Display - e.g. 1.25 minutes.
Shows cook time in full minutes only
from 180 - 10, and in minutes and seconds for
the final 10 minutes.
NOTE:
In Core Temp Mode, time display alternates
between ‘CP’ and set core probe
temperature.
‘Vent’ Key and LED -
Opens or closes the oven vent.
LED is ‘On’ when vent is open.
LED is ‘Flashing’ when vent is
changing position.
LED is ‘Off’ when vent is closed.
Time Adjustment Control
NOTE:
In Core Temp Mode, ‘Timer’ knob is
used to set core probe temperature.
‘On / Off’ (Stand-by) Control
‘Program’ Key and LED -
Used to enter/exit Manual and
Program Modes.
Used to select baking programs, and
to set baking parameters.
‘Temp’ Key and LED -
Displays actual oven temperature for 5
seconds on Temperature Display.
LED is ‘On’ when heating element is on
(heating indicator).
LED flashes when Upper Display is showing
actual temperature.
NOTE:
In Core Temp Mode, this key is used to
display Actual Oven Temperature (Upper
Display) and actual Core Probe Temperature
(Lower Display).
‘Stand-By Indicator LED -
LED is ‘On’ when mains power is supplied to the
oven, but ’On/Off’ switch is ’Off’.
‘Fan Lo’ Speed Key and LED -
Switches oven fan from high to low
speed.
LED is ‘On’ when fan is in Low Speed
Mode.
When LED is ‘Off’, fan is in High Speed Mode.
‘Timer-Start/Stop’ Key & LED -
The ‘Timer-Start/Stop’ key is used to
control the following functions:-
Starting Timer / Program.
Cancelling and Re-Setting Timer /
Program.
Cancelling Alarm (All Modes).
Starting Core Temp Mode (Core Temp
Mode).
Core Probe Connection Point.
Some parts of this oven will become VERY
HOT during use and could cause burns if
touched.
Warning
Take care when opening the oven door
during baking. Let the hot air and steam
escape before removing or replacing food as
the steam produced can cause steam burns.
Warning
