2
SPECIfICATIOnS AnD InSTALLATIOn
Certifications
cULus, UL EPH, TÜV, CE, FDA
Oven Construction
Exterior
- Powder coated, corrosion-resistant stainless steel
outer wrap.
- Stainless steel front panels and door
- Cool-to-touch exterior; all surfaces below 122°F
(50°C)
- Ergonomic door handle
Interior
- 201/304 stainless steel
- Fully welded and insulated cook chamber
- Removable rack and lower jetplate
Electrical Specifications
TurboChef recommends a Type D circuit breaker
for all installations outside the United States.
Single Phase (6200 watts)
US/Canada: 208/240 VAC*, 60 Hz, 30 A
Europe/Asia (UK): 230 VAC, 50 Hz, 30 A
Brazil (BK): 220 VAC, 60 Hz, 30 A
Latin America (LA): 220 VAC, 60 Hz, 30 A
Japan (JK): 200 VAC, 50 or 60 Hz, 30 A
Multiphase (6200 watts)
Europe/Asia Wye (EW): 400 VAC, 50 Hz, 16 A
Europe/Asia Delta (ED): 230 VAC, 50 Hz, 30 A
Japan Delta (JD): 200 VAC, 50 or 60 Hz, 30 A
Korea/Middle East Wye (KW): 400 VAC, 60 Hz, 16 A
Korea/Middle East Delta (SD): 230 VAC, 60 Hz, 30 A
* US/Canada models include a voltage sensor
that detects 208 or 240 VAC, but does not
compensate for lack-of or over-voltage installations.
Installation
Install or locate this appliance only in accordance
with the instructions below.
unpacking Instructions
1. Remove the oven from its packaging.
2. Before throwing the packaging away, check it
thoroughly for accessories and literature.
NOTE: Keeping the packaging is recommended in
case the oven may be shipped to another location.
3. Check the cook cavity thoroughly for
packaging, accessories, and literature.
4. Discard any packaging in the cook cavity.
Installation Warnings - Read Before Lifting Oven
WARNING: The oven weighs approximately
185 lb. (84 kg). Never lift with fewer than
two people.
WARNING: Never lift the oven by the door
handle. Doing so will cause the door to mis-
align, resulting in a non-warranty service call.
WARNING: The oven must be properly
placed on a food station at all times.
TurboChef will not recognize a fallen oven as
a warrantable claim and is not liable for any
injuries that may result.
WARNING: This oven is not intended for
built-in installation (i.e., installing the oven in
any structure that surrounds the oven by five
or more sides). Be sure to provide a minimum
of 2” (51 mm) clearance for all sides and 5”
(127 mm) clearance for the top.
WARNING: This oven is not intended to be
stacked without appropriate hardware.
Contact TurboChef for details.
WARNING: Never stack ovens more than
two high.
Summary of Contents for Encore Touch Rapid
