TGS-114
7
FOLDING RACK ASSEMBLY
1.
Insert the Clothes Rack (A) on the Telescopic Pole (B). (Figure 9)
2.
Slant the hook (D) of Folding Rack (C) around the angle of 40 degrees, and then
insert it into the hole of Clothes Rack (A). (Figure 10)
3.
Press the hook (D) vertically and tighten it. (Figure 11)
4.
Pull the arm of the Folding Rack (E) flatly until two poles (F) in the same line.
(Figure 12-13)
5.
Push the fixed pipe (G) onto the pole (F) by aligning the salient dots on the hole of
fixed pipe (G) and the pole (F). (Figure 14)
CAUTION:
Do not install the accessories while steam emitting from the Steam Nozzle
to avoid burns.
USE INSTRUCTION OF THE HAND HELD STEAMING BOARD
FOR POCKET
FOR COLLAR
FOR EVERY CORNER
Figure 15
Figure 16
Figure 17
Summary of Contents for TGS-112
Page 22: ...TGS 114 22 ...
