TGS-114
9
CLEANING & STORAGE
We recommend you follow this procedure at least once per week.
1. Turn the Switch to “Off”.
2. Unplug the unit from the power outlet.
3. Allow the steamer to cool for at least 30 minutes.
4. Remove the Hose and shorten the Telescopic Pole, then set them aside.
5. Remove and drain the Water Tank. Rinse the water tank with fresh water, and drain
completely. Place the Water Fill Tank back on the Water Reservoir.
6. Drain the steamer by removing the Drain Plug and emptying the contents.
7. Flush the unit by filling the Water Reservoir and the Hose Connector with fresh
water and draining completely. Replace the Drain Plug.
8. Wrap the Hose around the Telescopic Pole one time. Place the Steam Nozzle on the
steam nozzle holder.
9. Store in a cool, dry place.
REMOVING MINERAL BUILD-UP
One common problem with steamer is mineral build-up caused by a high mineral in
many municipal water suppliers. Mineral residue inside of the internal pipes and
heater can cause intermittent steaming or, in some cases, no steaming at all.
According to the water quality in different regions, we advise you to remove the
mineral build-up after using 7-15 days. Please take a reference of the following
procedure.
The procedure below can be used to reduce mineral build-up. If you are unable to use
de-mineralized or distilled water, we recommend you follow this procedure monthly.
1. Turn the unit off, and unplug the power cord.
2. Remove the hose and pole from the unit.
Figure 20
Figure 21
Summary of Contents for TGS-112
Page 22: ...TGS 114 22 ...
