Turbo TGS-112, Instruction Manual

Page: 5 / 22

TGS-114
5
PARTS DESCRIPTION
1. (A)Steam Nozzle Holder (B) Clothes Hanger Hook
2. Telescopic Pole
3. Steam Nozzle
4. Handle
5. Hose
6. Water Tank
7. Water Reservoir
8. Switch
9. Rolling Casters
10. Drain Plug
11. Hose Base
12. Pole Base
13. Indicating Lamps
14. Fabric Brush
15. Folding Rack
16. Pants Press
17. Glove
18. Hand Held Steaming Board
ASSEMBLY INSTRUCTIONS
1.Put the clothes hanger hook onto the top telescope pole (A) along the alignment as
shown in Figure 2.
2.Insert the bottom of the telescope pole into the pole base as shown in Figure 3.
3.Turn the pole base lock clockwise until tightened.
4.Loosen the clips on the telescope pole.
5.Pull the whole pole to its full extension and tighten the clips as shown in Figure 2.
6. Put the Hose onto the threaded Hose Base by turning the fitting on the end of the
Hose clockwise (See Figure 3). Hands tighten only. Do not over-tighten.
7. Hang the Steam Nozzle on the Steam Nozzle Holder as shown in Figure 4.
Figure 1
Figure 2 Figure 3 Figure 4