USE AND CARE INSTRUCTIONS
20
5.
7.
6.
Set Control Knobs to OFF and open the LP Gas tank valve
SLOWLY 1/4 ~1/2 of a turn
. For Natural Gas open the shut
off valve at source.
Push and turn Right Main Burner Control Knob to (IGN/
HIGH) and immediately press the electric ignitor button 3
to 4 seconds to light the burner.
If ignition does not occur in 5 seconds, turn the Burner
Control(s) off, wait 5 minutes, and repeat the lighting
procedure. If ignition still does not occur, turn the burner
control(s) and gas source OFF. Wait 5 minutes for gas to
clear and then conduct a leak test of ALL gas connections
and gas sources as explained in the Use and Care section
of this manual. If no leaks are detected, wait 5 minutes for
any gas to clear and repeat the lighting procedure.
After one Burner is lit, turn the tank valve SLOWLY one
more 1/4 of a turn.
Turn the adjacent burner knob to IGN/HIGH. The unlit burner
will light automatically. Note: When lighting all main burn-
ers, start with the burner furthest from fuel source location,
then light remaining burners in sequence moving toward
fuel source.
Failure to replace a faulty hose, secure gas supply
connections or to open the Lid before proceeding to
the Lighting Procedures could result in a fire or
explosion that could cause serious bodily injury,
death, or property damage.
WARNING
!
!
Grill Lighting Instructions
1.
Open LP Gas tank
OFF
Before each use, check all hoses for cracks, nicks, cuts,
burns or abrasions. If a hose is damaged in any way, do
not use your grill before replacing the hose with an
authorized part from the Parts List. Also make sure all
gas supply connections are securely tightened.
Familiarize yourself with all Safety and Use and Care
instructions in this manual. Do not smoke while
lighting your grill or when checking the gas supply
connections.
Be sure the LP Gas tank is filled.
Open the Grill Lid.
4.
3.
2.
(For Model BTH2621BLP/NG )
(For Model BTH3221BLP/NG )
Manually Lighting Your Grill By Paper Match
To light your gas grill by match, insert a match into the
Lighting Stick and follow steps 1 through 5 of the Grill
Lighting Instructions to light the burners. Then, light the
match and place Lighting Stick through the Cooking Grids
on the grill (See diagrams below) to light the main
burners. Turn the correlated Control Knob to the (IGN/
HIGH) setting to release gas. The Burner should light
immediately.
Main Burner
Light Operation(For BTH3221BLP/NG)
Note:
This grill is equipped with two interior halogen
lights for late night grilling.
Operation:
Push the light switch located on the con-
trol panel to turn "ON"/"OFF" interior lights.
Warning:
Do not touch the interior halogen lights. It
may be hot and could cause serious burns.
OFF
IGN/HIGH
LOW
OFF
8.
9.
Main Burner
