Turbo Energy HIS 5000/48, Instruction Manual

Page: 9 / 33

9
For proper air circulation to dissipate heat, allow a clearance of
approx. 50cm to the side and approx. 50cm above and below the
unit and 100cm to the front.
Inverter should be vertically installed, as shown in the installation
procedure below:
1. Position the bolts on the appropriate wall according to the
bolt positions on the mounting shelves and mark the holes.
On the brick wall, the installation must be suitable for the
expansion bolt installation.
2. Ensure that the position of the installation holes on the wall
(A, B, C, D) are the same position of the install plate, and the
mounting level is guaranteed.
3. Hang the inverter to the top of the mounting rack and then
use the M4 screw in the accessory to lock E and F to ensure
that the inverter does not move.