Turbo Energy HIS 5000/48, Instruction Manual

Page: 8 / 33

8
3.2. Assembly instructions
Installation precaution.
This Hybrid inverter is designed for outdoor use (IP65). Please make sure the
installation site meets below conditions:
• Not in direct sunlight.
• Not in areas where highly flammable materials are stored.
• Not in potential explosive areas.
• Not to expose directly to cold airflow.
• Not near the television antenna or antenna cable.
• Not higher than altitude of about 2000 meters above sea level.
• Not in environment of precipitation or humidity (>95%)
Please AVOID direct sunlight, rain exposure, snow laying up during
installation and operation. Before connecting all wires, please take off the
metal cover by removing screws as shown below:
Consider the following considerations before selecting the installation
location:
-
Please select a vertical wall with load-bearing capacity for
installation, suitable for installation on concrete or other non-
flammable surfaces. Installation is shown below.
-
Install this inverter at eye level in order to allow the LCD display to
be read at all times.
-
The ambient temperature should be between -25
℃
and 60
℃
to
ensure optimal operation.
-
Be sure to keep other objects and surfaces as shown in the diagram
to guarantee sufficient heat dissipation and have enough space for
removing wires.