Tunstall ComStation, User Manual, Page: 19 / 48

Setting up the ComStation
TEL
17
5. Insert the outside, rear snap-fits into the mounting
holes on the bottom shell. Tilt the footstand forward and
downward until the snap-fits snap into place in the
mounting holes. Please, make sure that the four snap-
fits have securely snapped into the holes before mount‐
ing the unit on the wall.
Figure 6: Mounting the footstand for wall mounting
6. After connecting the cables, form the cables into loops
and gently press the long ends into the slots on the foot‐
stand. The loops should not be too big, so that they will
not hamper the secure mounting of the unit on the wall,
and not too small, so that the cables will not be bent or
broken.
The speaker of the handset has a small, rectangular indent‐
ation that fits over the rounded end of the plastic tab inser‐
ted into a slot on the top shell of the unit. When the unit is
mounted on the wall, the handset must be placed on this
rounded end to ensure that it will not fall off.
7. Slide the tab out of the slot, rotate it 180°, and slide it
back into the slot.