4
USER MANUAL
TUNAXSTD07
2. SPECIFICATIONS
Model Number
TUNAXSTD07
Maximum Load:
7 Tonne (14 Tonne Capacity Pair)
Minimum Height:
267mm
Maximum Height:
420mm
Weight (NW/GW):
14kg / 14.6kg
3. DESCRIPTION
These industrial axle stands are manufactured from heavy-duty steel for strength and durability. Features include:
•
(2x) Heavy-duty 7 Tonne axle stands.
•
Sturdy welded steel construction for superior safety and strength, which helps prevent distortion and twisting
•
Large saddles for even load distribution
•
Supplied with captive pin load support
•
Suitable for use with forklifts and vehicles with low suspension
•
Sold, and designed for use, in pairs
4. ASSEMBLY
Use the parts diagram on the next page as a reference to help you to assemble this equipment.
Insert the extension column into the base collar. Secure the extension columns at the required height with the support rods.
5. OPERATING INSTRUCTIONS
WARNING! Ensure you prepare vehicle and use jack according to Section 1 SAFETY GUIDELINES.
•
Do not overload Axle stands beyond rated capacity. Overloading can cause damage to, or failure of, the Axle stands.
•
POSITION LOAD ON CENTRE OF CRUTCH/SADDLE ONLY. ALWAYS USE STANDS IN PAIRS ON HARD LEVEL SURFACE CAPABLE
OF SUSTAINING THE LOAD. USE OF STANDS ON OTHER THAN HARD LEVEL SURFACES CAN RESULT IN LOAD INSTABILITY AND
POSSIBLE LOSS OF LOAD. DO NOT USE ON TARMACADAM.
•
Failure to follow these instructions may result in damage to Axle stands, loss of load resulting IN property damage, SERIOUS
personal injury OR LOSS OF LIFE.
•
DANGER! GREAT CARE MUST BE TAKEN TO ENSURE YOU LOWER THE VEHICLE (OR OTHER LOAD) SLOWLY AND CAREFULLY
ONTO THE CENTRES OF THE CRUTCH/SADDLE OF THE AXLE STANDS (See diagram RIGHT).