5
USER MANUAL
TUNAXSTD07
6. PARTS DIAGRAM
7. MAINTENANCE
•
Before each use, check that stands and stand welds are not cracked and that there are no missing or damaged parts.
•
Only apply grease to the locking handle pivot point of the stand and ensure all excess grease is wiped away before
stand is used.
•
If rust appears, sand away the rusted area and cover with appropriate utility paint.
•
Please note that there are no replacement parts available for this product.
•
Any suspect axle stands must be removed from service immediately
•
Due to the potential hazards associated with stands, do not misuse, or make any modification to, the stands or components
•
It is the responsibility of the owner to ensure that the operator has read these instructions together with the safety features
on the side of the stand and that the operator is aware of the stand uses and limitations.
