TuffStuff TDH-345 Owner'S Manual Download Page 9

Page: 9 / 20

Fig. 22

Secure both

Pec Dec Arms (#38, #39)

to the

Pec Dec Housin

(#15)

using two Exterior Retainer Rings (#42). Use a External retaining-rin

pliers for this job. If this tool is not available, carefully work each Exterio
Retainer Ring (#42) into the groove, then push-up alternately with a screw
driver working the Exterior Retainer Ring (#42) into the groove.

Note

: Be careful not to distort the Exterior Retainer Rings (#42) o

bend them.

ig. 21

Locate the

Pec Dec Arm Lt. (#38)

and the

Pec Dec Arm Rt.

#39)

and, using a rubber mallet, insert two Plastic Insert Caps 1 3/4” SQ.

#71) into each of the tube-ends, as shown above.

ext, insert the axles of the

Pec Dec Arm Lt. (#38)

and the

Pec Dec Arm

t. (#39)

into the

Pec Dec Housing (#15)

, as shown above.

Note

: It is recommended to grease the axles of the

Pec Dec Arms

(#38, #39)

with multi-purpose grease prior to assembling them to the

Pec Dec Housing (#15).

ig. 23

Attach the

Back Pad Pulley Bracket (#23)

to the

Center Upright

#19)

and secure it into place using one Hex Head Cap Screw 3/8-16 X 2

/4 (# 33), two Flat Washers SAE 3/8” (#45), and one Nylon Insert Jam Lock

ut 3/8-16 (#46). Refer to the Exploded View Diagram on page 18 for fur-

her illustration of this assembly.

Note:

One Hex Head Cap Screw 1/4-20 X 1 1/2 (#68), and one Nylon

Insert Lock Nut 1/4-20 (#69) have been assemble to the

Back Pad

Pulley Bracket (#23)

by the factory. This assembly works as a cable

retainer.

ext, attach the

Back Pad (#18)

to the

Back Pad Pulley Bracket (#23)

, in

he position as show above, using two Hex Head Cap Screws 3/8-16 X 1 1/4

#83), and two Flat Washers SAE 3/8” (#45).

Fig. 24

Locate the two

Pec Dec Arm Pads (#17)

and attach one to th

Pec Dec Arm Rt. (#39)

using two Hex Head Cap Screws 3/8-16 X 2 3/

(#33), and two Flat Washers SAE 3/8” (#9), as shown above.
Next, attach the other

Pec Dec Arm Pad (#17)

to the

Pec Dec Arm L

(#38)

using one Hex Head Cap Screws 3/8-16 X 3 1/4 (#82), one Rubbe

Bumper 3/8 X 1 1/2 (#65), one Hex Head Cap Screw 3/8-16 X 2 3/4 (#33
and one Flat Washers SAE 3/8” (#45), as shown above.

TDH 345 Half Cage Ensemble

Summary of Contents for TDH-345





















Search results

Summary of Contents for TDH-345

Reviews:

Related manuals for TDH-345

Brands by name

Popular brands

TuffStuff TDH-345, Owner'S Manual

Search results

Summary of Contents for TDH-345

Reviews:

Related manuals for TDH-345

Brands by name

Popular brands