background image

It is the responsibility of the owner and users of the equipment to review the Owner’s Manual, Exercise Chart and understand all Danger, 

Warning and Caution labels affixed on the machine. 

   

SERIOUS INJURY OR DEATH CAN OCCUR IF 

THESE SAFETY PRECAUTIONS ARE NOT OBSERVED:

1.  Obtain a medical exam before beginning any exercise program.
2.  Read and understand Owner’s Manual, Exercise Chart and all 

Danger, 

Warning and Caution

 labels before using this equipment. If you 

still need help, seek assistance from floor personnel or call TuffStuff 
Fitness at 888-884-8275.

3. 

Inspect the equipment

 before each use for wear and tear, loose 

fittings, worn or frayed cables and frame welds.  DO NOT USE if it 
appears to be inoperable or damaged.

4.  Stop exercising if you feel faint or dizzy. Consult a physician if you are 

experiencing pain.

5.   Keep body, clothing and hair clear from all moving parts. Do not 

attempt to free any jammed parts by yourself.

6.   Always warm-up before and cool-down after weight training. 

Warm-up for 10-15 minutes with stretching and cardiovascular 
exercises. Cool-down should include light stretching exercises for 
5-15 minutes.

7.   Never hold your breath – will limit the flow of oxygen to your brain 

and may cause dizziness. The most often used breathing is inhaling 
during least resistance and exhaling during maximum resistance.

8.  Do not use accessories or accessory attachments that are not 

recommended by TuffStuff Fitness.

9.  Make sure adjustment pull-pins are completely inserted and fully 

engaged before each use.

10.  Never pin the weights in an elevated position. Do not use the machine 

if found in this condition. 

Facility Safety Guidelines and Practices

1.  Read and understand the Owner’s Manual before assembling, 

servicing or using the equipment.

2.  Equipment to be installed by TuffStuff Fitness Authorized Dealer or by 

a Professional Service Company approved by TuffStuff Fitness.

3.  Make sure each machine is set up and operated on a solid level 

surface. Do not install equipment on an uneven surface.

4.  Provide an adequate safety perimeter between the machine, walls 

and other equipment to ensure that the facility has proper clearance 
for usage and training.

DANGER:

 indicates an imminently hazardous situation which, if not 

avoided, will result in death or serious injury.

WARNING:

 indicates a potentially hazardous situation which, if not 

avoided, will result in death or serious injury.

CAUTION:

 indicates a hazardous situation which, if not avoided, could 

result in minor or moderate injury.

5.  Post and disclose all safety, rules and regulations on a bulletin board 

easily accessible to users.

6.  Perform regular maintenance (see Inspection Label). Pay special at-

tention to areas most susceptible to wear and tear, including but not 
limited to cables, pulleys and rubber grips.

7. 

Do not

 lean against or pull on the framework, weight stack or any 

component at all times.

8. 

Children must not

 be allowed near the equipment. Teenager must 

be supervised.

9.  Replace immediately all parts at first sign of wear or damage. If unable 

to replace worn or damaged components/parts, remove machine from 
service until the repair is made.

10.  Use only genuine TuffStuff Fitness replacement parts. Failure to do so 

will void warranty and could result in serious injury or death to the 
users.

11.  

Do not remove

 any LABELs affixed to the machine. Replace if 

damaged.

12.  

Do not alter or modify

 the original manufacturer’s weight stack with 

any add-on incremental weights, weight plates or dumbbells except 
those with standard factory installed option.

13.  Maintain a service contract with a TuffStuff Fitness Authorized Dealer 

or a Professional Service Company approved by TuffStuff Fitness. Keep 
a service log of all maintenance and repair activities. 

NOTICE:

 It is 

the sole responsiblity of the owner or facility operator to ensure that 
regular maintenance is performed.

3

SPT-6X     Six-Pak Trainer

www.tuffstuffitness.com

Important Safety Instructions

Summary of Contents for SPT-6X

































Reviews: