FIG. 21
Affix the
Weight Shroud (#2)
to the bottom of the
Weight
Stack Frame (#1)
and at the top of the
Guide Rod Retainer (#5)
us-
ing four Hex Head Cap Screws 1/4-20 X 3/4 (#21), and four Flat
Washers 1/4” (#20).
FIG. 22
Insert the two Plastic Shroud Edge Protectors (#12) to both
Shrouds (#2, #3)
, in the position as shown above, and slide them all
the way down.
7
CABLE ADJUSTMENT
It is imperative that you maintain proper cable adjustment to ensure
a safe and smooth operation.
Caution:
The Cable should be inspected and adjusted peri-
odically to avoid any slack in the cable which would, conse-
quently, prevent any damage to the equipment or personal
injury.
Cable Adjustment
1. Loosen the Finished Hex Nut 1/2-13 (#59).
2. Thread the Cable Hex Tap Bolt 1/2-13 X 3 (#56) in or out
of the threaded socket of the
Top Plate Selector Bar (#9)
to give the
Cable (#38)
proper tension.
3. Re-tighten the Finished Hex Nut 1/2-13 (#59) to complete
the adjustment.
Caution:
Make sure the Cable Hex Tap Bolt 1/2-13
X 3 (#56) is threaded at least 1/2” into the threaded
socket of the
Top Plate Selector Bar (#9)
once the
cable adjustment has been completed.
56
9
57
59
2
5
12
12
3
2
SP-401 Supine Bench Press
38
