Step 1
(Remove CSM-600 Top Cross Brace)
Note:
Before attaching the
CHL-610WS
to the
CSM-600
, please remove
the
Top Cross Brace (#21)
following the below illustration.
Note:
It is strongly recommended that two
people participate in this assembly step.
Step 1b ReAssembly List
Item
Qty. Description
*17
2
OLYMPIC ADAPTER 1 X 8 X 3 9/16 AXLE ASSEMBLY
33
2
HEX HEAD CAP SCREW GR-5 Z/P 1/2-13 X 1 1/2
36
2
FLAT WASHER SAE Z/P 1/2”
38
2
SPLIT LOCK WASHER B-Z/P 1/2”
87
2
RUBBER WASHER 1 7/8 ID X 4 1/4 OD X 9/16 TK
Step 1a Remove List
Item
Qty. Description
21
1
TOP CROSS BRACE
32
2
HEX HEAD CAP SCREW GR-5 Z/P 1/2-13 X 4 3/4
36
4
FLAT WASHER SAE Z/P 1/2”
40
2
NYLON INSERT LOCK NUT Z/P 1/2-13
78
8
NYLON SNAP-IN FINISHING PLUG 3/8”
100%
Remove
Remove hardware assemblies completely to
allow fi nishing successive assembly steps.
Note:
After Removing the
Top Cross Brace (#21),
reassemble the
Olympic Adapters (#*17)
following the below illustration.
100%
Fully Tighten
Wrench tighten all hardware in this step.
Note:
Some parts have been removed for Clarity.
11
CHL-610WS High/Low Pulley w/200 Lbs Weight Stack for CSM-600
www.tuffstuffi tness.com
