Page 8
Step 53
out “H” motor mount from paper
template as shown.
Step 55:
Drill 1/8” holes where shown.
Step 54:
Apply template to white plastic
sheet.
Step 51:
Apply weights while glue cures as
shown.
Take care to
insure fuse is
perpendicular to
wing and things
look square and
symmetrical
Step 52:
Gather parts and tools.
Make Motor Mount
You’ll need :
scissors, white motor mount plastic
paper templates, 3M77, drill,
motor
Step 58:
Saw to remove “H” insides as
shown.
Step 57:
Drill 1/4” holes where indicated at
“H” corners
Step 56:
Drill central 1/2” hole where
indicated.
Step 59:
Saw to remove “H” insides as shown.
A band or scroll saw may also be used.
Step 60:
Round edges with knife or disc
sander as shown
A band or scroll
saw may also be
used if available
*Note, cutouts are
NOT identical
Top cutout is
smaller than
bottom -- label Top
/ bottom to avoid
confusion later
