INSTALLATION GUIDE 920.1037.03 |
17
Monthly: check that the closing door reverses when the safety sensor
beam is interrupted. Monthly: ensure that the garage door reverses on
contact with a 1.5 inch high object (or a 2” by 4” board laid flat) on the
floor.
During winter:
if the door reverses off a build up of snow or ice then the
doorway should enable the door to close fully.
Every 6 months or 2500 cycles whichever is sooner:
1. Release the Manual Override Lever and move the door manually to
assess the balance of the door and to check if it is binding.
(Pic 13).
2. Check the adjustment of the Manual Override Lever tension. The lever
should be horizontal when the release spring is compressed and the drive
belt slack is taken up. If the lever tension requires increasing then turn the
lever hook screw clockwise to increase the tension. Do not over-tension
the Manual Override Lever.
(Pic 14).
3. Check that the door opens and closes fully.
The motor operator does not require additional lubrication. Do not grease
the door tracks. If there is any doubt about the correct operation of the
door then contact your garage door/opener dealer.
PIC 13
MAINTENANCE SCHEDULE
PIC 14
Summary of Contents for ZAP THE BUTLER
Page 1: ...920 1037 02 ...