920.1044 | 19
3. UPLOAD / DOWNLOAD
There is a USB port on the Logic board via which the following operations can be carried out:
- Load data from a USB pen drive (UPLOAD).
- Save data to a USB pen drive (DOWNLOAD).
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
For both operations, the USB pen drive must be formatted with the FAT or FAT 32 le system.
The NTFS format is not recognized.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
In order to upload, the les required, the names of which are indicated in
H
must be present in the root
directory of the USB pen drive.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Turn power o to the 950N2.
2. Insert the USB pen drive in the USB port (J2) on the Logic board.
3. Turn power on to the 950N2.
4. If the device is detected correctly, the green LED DL1 of the Logic
(08)
board lights up steadily.
5. The available functions are selected by briefly pressing button SW1 on the Logic board
(08).
The operation to be
carried out is indicated by the number of ashes of the green LED. Each time the button is pressed, the operations
selected are indicated in
H
.
6. Press and hold the SW1 button for at least 3 seconds to use the function. The green LED ashes more quickly while
the procedure is being carried out. When finished, the result is signaled by the status of the following LEDs:
- Green LED ( DL1 ) on steadily = completed successfully
- Red LED (DL2) on steadily = error
7. Turn power off to the 950N2 and remove the USB pen drive.
Summary of Contents for KP evo
