B u d d y B X 4
43 -
6.10 GPS Setting (Option)
Press
<MENU>
to enter the DVR system menu, choose “GPS” to enter its sub-menu.
a) The DVR system will check the GPS device automatically. If a GPS device is found to be connected,
the “GPS DEVICE” will show “GPS OK”; if no GPS device is found, it will show “GPS NONE”.
be set as “ON” or “OFF”. If it is set to be “ON”, the GPS coordinate will be
R
system time automatically (Recommended). If it is set to be “OFF”, it may not synchronize the
time.
d) “BAUDRATE” refers to GPS communication baudrate. The defaulted baudrate is 4800. 2400, 9600,
19200, 38400, 57600, 115200 for options.
6.11 Event Button & Cable Setting (Option)
b) ”GPS BURNIN” can
shown on the screen; if it is set to be “OFF”, the coordinate will be hided.
c) “GPS TIME SYNC” can be set as “ON” or “OFF”. If it is set to be “ON”, it will synchronize the DV
Two different applications of the Event Button & Cable:
)
Work as “Start/Stop Recording”.
)
Work as “Alarm Input”.
)
Press
<MENU>
by remote to enter the DVR system menu;
)
Choose “ALARM” and press
<OK>
or
<MENU>
to enter its sub-menu;
)
Go to “POST EVENT RECORD” and set the time, press
<MENU>
or
<OK>
to save and exit.
1
2
1
2
3
