B u d d y B X 4
39 -
6.8 Manage the power
6.8.1, Use ignition switch to turn on/off the DVR system
1) Connect ignition switch to the yellow wire of power supply cable, and red / black wire to the “+” / “-”
pole of the car battery. The DVR system will be turned on when the ignition switch is in the ON position,
and commences recording. To stop the recording process, place the system switch in the OFF position.
2) If the OFF DELAY option is enabled, the DVR will continue to record for the prescribed number of
and DVR system shut off right after the ignition switch if in the OFF position.
seconds. When the off-delay expires, the camera and DVR system shut off.
3) Set OFF DELAY. Press
<MENU>
to enter the DVR system menu, choose “POWER” and press
<MENU>
to enter its sub-menu. Go to “POWER OFF DELAY” and set the number of seconds. The
maximum number you can input is 86400 seconds (24 hours). If the number is set to 0, the camera
4) If the vehicle is using low level as ignition signal, you need to set the “IGNITION SIGNAL” as “LOW
LEVEL”.
NOTE: If the vehicle uses low level as ignition signal, you need to set the “IGNITION
SIGNAL” as “LOW LEVEL” .
