TTA TIANNONG M6E-1, Manual

Page: 28 / 56

Copyright © 2017 TTAAll Rights Reserved. Appendix Implication of indicator light
27
2. After GCS installation,the label will be appeared as figure 5-1.
TTA-M6E-1 support Android 4.0 or above
3. Open GCS,enter into the start page.
4. Enter into the main page ,see figure 5-2.
Figure 5-2
5.2 Parameters adjustment
Type 1: Connection by OTG cable

Sensitivity should not be changed by common user,the unnecessary loss
should be taken by user for authorized changing.

Remote controller could not unlock before parameters adjustment.

Exit could only be done when all of the parameters adjustment should be done
and confirmed.Copter could only fly by restarting after parameters adjustment.
Parameters could be adjusted when copter connected,the steps are as followings:
1) Open the OTG function from cellphone SETTINGS---SYSTEM---OTG(the default is Off
thus it should be opened every time),see figure 5-2-1.