TT INT'L HK Tech IP Cam User Manual Download Page 7

Page: 7 / 83

TT IP CAM User Manual

http://www.ttipcam.com

- 7 -

●

Features:

- H.264 compression, best for Internet video Streaming

- No Static IP address required, No DDNS service needed.

- D1 Resolution.

- Support Win CE based PDA and Mobile Phone local and remote viewing.

- Support SD/SDHC card recording, NAS recording, NVR recording, and remote view and

recording.

- Multi-streaming capability.

- Support UPNP protocol.

- Support DHCP, Static IP, PPPOE internet enviroments.

- NVR support 128 cameras' D1 video recording in LAN. Can manage numerous IP cameras

depending on the NVR PC's ability.

- 3 Level (High, Middle, Low) user priority management.

- Two-way audio function: audio in and audio out for speaker with amplifier

- With BNC connector for composite video output as normal camera.

Summary of Contents for IP Cam




















































































Search results

Summary of Contents for IP Cam

Reviews:

Related manuals for IP Cam

Brands by name

Popular brands

TT INT'L HK Tech IP Cam, User Manual

Search results

Summary of Contents for IP Cam

Reviews:

Related manuals for IP Cam

Brands by name

Popular brands