TT INT'L HK Tech IP Cam, User Manual

Page: 42 / 83

TT IP CAM User Manual http://www.ttipcam.com
- 42 -
A1.
The cable used for your PC will work for the IPcam, too. Technically, it’s a category 5 UTP cable with
RJ-45 plug-in connectors.
Q2. How do I keep my IPcam as private as possible?
A2.
Do not share your AccountID/ Password with others. It is recommended to setup multiple
Sub-Account for different viewers. (See User’s Manual “Sub-Account Management”)
Q3. How many users are allowed to watch my IPcam simultaneously?
A3.
Only one user can view the IPcam over Internet at a time, unless the PMS Media Server is installed.
But, all the viewers in LAN can view the IPcam simultaneously via DVR or Setup utilities.
Q4. What if I forgot my password?
A4.
There are two kinds of passwords.
For security reason, password of the IPcam set by Setup utility is stored in the hardware and is unable to
be retrieved. User has to hold the REC button and reboot the IPcam to erase the password. Please hold
the REC button for 5 seconds, then push the RESET button.
Password set by Remote_Viewer utility (AccountID) can be retrieved. The system will reply after you
correctly answer the security question you provided when registered.
Q5. Why there’s no Video displayed?
A5.
As an individual user viewing from internet, please check if you are behind a firewall. It’s possible to
get no video if both IPcam and viewer are behind firewalls or NAT Router. Consult your MIS to view from
this environment.
Q6. Why the image is not clear enough?
A6.
Adjust the lens that connected to the IPcam to get the best focus.
Another possibility is the low bandwidth. Video quality is limited by the bandwidth of network. User is
recommended to adjust the resolution and frame-rate according to user’s network environment.
Q7. Why the timestamp on the video is different from the time of my PC?
A7.
The timestamp is based on the hardware system time of the IPcam. The real-time clock (RTC) inside
the IPcam can be set by user remotely by updating the via Remote_Viewer utility, or locally via Setup
utility.
Q8. Can I set up different IDs for different users under my authorization?