TT INT'L HK Tech IP Cam, User Manual

Page: 60 / 83

TT IP CAM User Manual http://www.ttipcam.com
- 60 -
Video input source
：
User may choose between Composite or S-Video. This is not needed for 100B
series.
Standard mode
：
User may choose between NTSC or PAL
。
System control: User may reboot camera.
Vertical and Horizontal mirror
：
User may adjust image.
<2.3>Motion Detector
Regional Choice
：
User may choose up to three regions
，
use the mouse to select region.
Opening motion detector
：
Check the region wished to open.
Sensitivity
：
user may adjust the sensitivity of the motion detector.
Regional name
：
User may have a name for a regional motion detector, that name will be used on e-mail
alarm.
If user wishes to do the same for other cameras, user may use the “apply to…” function.
After Setup, selected camera will show three little men at the bottom-left corner.
：
represents all regions are detecting motion
，
different colors represent different regions.
：
When the all lights go off, that means no motion is detected.
<2.4>Local Alarm