Tsuruga 471C, Quick Manual, Page: 18 / 52

Usage of Function Code
16
471C
Usage of Function Code
Function code list
● Display functions
Code
№
Function Display １ Setting range
Default
Value
00
Key protect
KEY. OFF, ON OFF
01
Scale
α SCAL 000001E-9 to 999999E-0 000001E-0
02
Decimal point
DP 0/0.0/0.00/0.000/0.0000/0.00000 0
03 Input frequency filter FLTR. 0.02kHz/10kHz/30kHz/100kHz 10kHz
04
Display cycle RATE
00.1 to 19.9s 01.0
05
Number of moving average M.AVE.
01 to 10 1
06
Min. revolution No. MIN.R.
000000 to 999999 000000
07
Cut-off time CUT
000.1 to 150.0 006.0
08
Predicted function P.F.
OFF （ Invalid ） /ON （ Valid ） OFF
09
Display of SV1, SV2 SUB. OFF-OFF, PM-BM / OFF,HH,H,L,LL,PM-BM
＊ 1)
PM-BM
10
Display switch-off function TURN.
0(OFF)/1(All display)/2(SV1, SV2),
0 to 99 minutes
0.01
11
Display color
COLO. R(Red), G(Green) G(Green)
＊
1 ） Display settings of HH,H,L,LL become enable, when comparison output function is on.
● Option comparison output function （ HH,H,L,LL ）
Code
№
Function Display １ Setting range
Default
Value
40
Memory-enable
MEM.
OFF(Invalid ） /ON(Valid ） OFF
41
HH compared value
AL.HH
000000 to 999999
＊ 2)
999999
42
H compared value
AL. H
000000 to 999999
＊ 2)
999999
43
L compared value
AL. L
000000 to 999999
＊ 2)
000000
44
LL compared value
AL.LL
000000 to 999999
＊ 2)
000000
45
Hysteresis
HYS.
01 to 99 01
50
Power-on delay
P.DLY
1 to 99 seconds 1
51 HH comparison function
FRM.HH
OFF/ON ON
52
H comparison function
FRM. H
OFF/ON ON
53
L comparison function
FRM. L
OFF/ON ON
54
LL comparison function
FRM.LL
OFF/ON ON
55
Comparison condition
EQUL
GO (Equal ‘ GO ’ ), NG (Equal ‘ NG ’ ) GO
＊
2 ） The settings of MEM 1 to 8 become enable, when code No.40 ’ Memory-enable ’ function is on.
● Option BCD output, Analog output
Code
№
Function Display １ Setting range
Default
Value
70
BCD logic switching
B.PN
0: Negative, 1: Positive
0: Negative
76
Digit selection
D.SEL.
0 (Last 4digits), 1 (Middle 4 digits),
2 (First 4 digits)
0
79
Full-scale
A.FUL.
0 to 9999
9999