Tsubaki TSM4000, Instruction Manual, Page: 5 / 28

- 4 -
4. Checking the Package Contents
4. Checking the Package Contents 4. Checking the Package Contents
4. Checking the Package Contents
Check the following about the product you purchased.
(1)
Do the model number and specifications on the name plate match your order?
(2)
Were there any damages suffered during transportation?
(3)
Are the following contents included? (For their appearances, refer to the outer
dimensions on page 24.)
Shock Monitor unit (including a socket): TSM4000 (Panel mounting type: TSM4000P)
Current sensor: TSM-U*** or TSM-M***
Sensor cable: TSM4-S01
4.1 Model number meaning (Main unit + Current sensor)
● The model number of the combination of the main unit and current sensor consists
of the model numbers of the main unit and sensor as follows:
TSM4000 TSM4000 TSM4000 TSM4000
‐
‐ ‐
‐
U010 U010 U010 U010
Model No. of the main unit Model No. of the current sensor (Last 4 digits of
TSM-U010)
● The model number of the sensor cable indicates the cable length as follows:
TSM4-S01 ..."01" means 1 m cable
The TSM4-S01 sensor cable is included as an accessory. If this cable length is
insufficient, optional cables of 3 m, 5 m, 10 m, 20 m and 30 m are available. Contact
TEM when necessary.
5. Part Names
5. Part Names 5. Part Names
5. Part Names
①
LCD display
② LED indicators
③ Operation keys
④ Connector CN1
⑤ Connecting hooks (4)
⑥ Terminal block for wiring
① LCD display ... Shows load ratio, setting values and parameter settings.
② LED indicators ... Indicates that the motor is running and that the output relay is activated.
③ Operation keys ... Keys used for switching the displayed mode or for changing parameters.
④ Connector CN1 ... Connector for using signals such as control input or analog output.
⑤ Connecting hooks ... Used to connect/disconnect the main unit to/from the socket.
For connection, fully insert the main unit until the hooks lock securely.
For disconnection, press down the four hooks simultaneously and
remove the main unit from the socket.
⑥ Terminal block for wiring ... Terminals for connecting an operational power supply, motor
voltage, relay output, current sensor cable, etc.
C
o
n
te
n
ts
U
s
a
g
e
U
s
a
g
e
U
s
a
g
e
U
s
a
g
e
/N
a
m
e
s
/N
a
m
e
s
/N
a
m
e
s
/N
a
m
e
s
S
a
fe
ty
In
st
al
la
tio
n
/W
ir
in
g
T
er
m
in
a
ls
C
on
n
ec
tio
n
O
p
e
r
a
ti
o
n
M
ai
n
te
n
an
ce
/In
sp
ec
tio
n
Sp
ec
ifi
ca
tio
ns
D
im
en
si
on
s
W
a
r
r
a
n
ty
Main
unit
Socket
(D-SUB connector, 15P, male)